Automatic interactive play with no remote included.

• Touch activated

• Three motion modes

• Automatic sleep and wake-up

• Manual button control

• No remote included

What’s in the Box

• Interactive Dog Ball × 1

• USB-C Charging Cable × 1

• User Guide × 1

Remote-controlled interaction plus automatic play.

• Remote control included

• Three motion modes

• Remote and manual button control

• Automatic sensor play

• Directional interaction

What’s in the Box

• Interactive Dog Ball × 1

• Remote Control × 1

• USB-C Charging Cable × 1

• User Guide × 1

Charge Before Playing

Fully charge the ball before first use. Use the included USB-C cable with a standard 5V/1A USB adapter.

Inspect the Toy

Before every play session, check the ball for cracks, loose parts, exposed wires, or other damage. Stop using it immediately if damage is found.

Introduce It Gradually

Let your dog sniff and explore the ball while it is turned off. Begin with Low Speed, especially for smaller, cautious, or first-time users.

Supervise Play

Always supervise your dog during play. This product is a dog toy and is not intended for children.

Select a Motion Mode

Press the main button repeatedly:

1. First press: L — Low Speed

2. Second press: M — Medium Speed

3. Third press: H — High Speed

4. Fourth press: Power Off

Automatic Sensor Play

• After powering on, the ball enters automatic play mode after approximately 20 seconds.

• Tap or gently push the ball to wake it. It will move for approximately 10 seconds, then return to sleep mode.

• If it is not touched for approximately 4 hours, it powers off completely to conserve battery.

Pairing the Remote

Pair the remote before first use:

1. Open the ball’s outer casing.

2. Press and hold the ball’s power button until the pink indicator illuminates.

3. Press and hold the remote’s power button.

4. Test the connection by pressing and holding the remote power button for approximately two seconds.

5. If pairing fails, repeat the steps.

Remote Buttons

• Power: Press and hold for approximately two seconds to turn on; press briefly to turn off.

• L: Low Speed

• M: Medium Speed

• H: High Speed

The remote works best in open areas. Walls and wireless interference may reduce the effective range.

Automatic Sensor Play

• After powering on, automatic sensor mode begins after approximately 30 seconds.

• Tap or gently push the ball to wake it. It will move randomly for approximately 5–15 seconds, then return to sleep mode.

• If it remains untouched for approximately 4 hours, it powers off completely.

The ball has an IP67 waterproof rating and can withstand accidental water exposure. However, do not intentionally soak or submerge it for extended periods.

After play:

1. Wipe or rinse the outer surface as needed.

2. If exposed to pool water or seawater, rinse with clean fresh water.

3. Dry the ball completely.

4. Ensure the charging port and internal areas are dry before charging.

Always supervise your dog during play.

Not intended for children.

Inspect the toy before every use.

Stop use immediately if cracked, loose, or damaged.

Avoid stairs, sharp objects, and rough surfaces.

Do not allow prolonged unsupervised chewing.

Do not open, replace, or repair the internal battery yourself.

Keep the charging port dry.

Store in a cool, dry place away from direct sunlight and extreme temperatures.

This product is intended for rolling, chasing, and interactive play. It is not an indestructible chew toy.